DJI Lito X1

Omnidirectional Obstacle Sensing With Forward-FacingLiDAR, Fearless Flight
ActiveTrack , Easily Unlock Cinematic Shots
1/1.3-Inch Sensor, Breathtaking Pro-Level Imaging
Under 249 g , Lightweight and Portable
Extended Battery Life for More Flight and Fun
15km Video Transmission , Stable and Smooth

1, Compared with DJI Mini 3, what are the main improvements of DJI Lito X1?

DJI Lito X1 has comprehensive improvements in the camera system, vision sensing system, flight performance, and video transmission system. The main improvements include:

1. Camera System: DJI Lito X1 features a 1/1.3-inch CMOS sensor and a new image processing platform, and supports recording up to 4K/60fps HDR videos, up to 4K/100fps slow-motion videos, and 2.7K vertical videos. For HDR videos, it supports a dynamic range of up to 14 stops ^[1]. The drone uses DJI's portrait optimization technology ^[2], and also supports smart recording modes like MasterShots, QuickShots, and Hyperlapse, to make content creation easier.

2. Sensing System: DJI Lito X1 features forward-facing LiDAR, supporting omnidirectional obstacle sensing ^[3]. It can actively detect and avoid obstacles such as buildings along the flight and return paths, ensuring safer urban nightscape photography. It can also memorize flight paths in well-lit conditions, enabling quick takeoffs and safe returns even without satellite signals ^[3].

3. ActiveTrack ^[4]: DJI Lito X1 supports ActiveTrack. Tracking performance has been enhanced to balance speed, agility, and safety.

4. Flight Performance ^[5]: The Intelligent Flight Battery offers up to 36 minutes of flight time and a maximum takeoff altitude of 4500 meters. The Intelligent Flight Battery Plus offers up to 52 minutes of flight time and a maximum takeoff altitude of 3500 meters.

5. Video Transmission: DJI O4 Video Transmission offers up to 15 km of 10-bit video transmission ^[6], with stronger signal stability, enhanced anti-interference capabilities, and superior image quality.

6. Off-State QuickTransfer: DJI Lito X1 has 42GB of internal storage. DJI Lito X1 supports remote wake-up via the DJI Fly app within Bluetooth range, enabling high-speed file transfers at up to 50MB/s ^[7].

7. Battery Charging Efficiency ^[8]: Using the DJI 65W Portable Charger and charging via the Charging Hub, it takes approximately 45 minutes to fully charge a single Intelligent Flight Battery, and approximately 56 minutes to fully charge a single Intelligent Flight Battery Plus. Fully charging three Intelligent Flight Batteries takes about 87 minutes in total. And for three Intelligent Flight Batteries Plus, it takes 130 minutes to get fully charged.

1. 14 stops of dynamic range are achievable for video on Auto mode, but not for slow-motion videos or 2.7K@48/50/60fps vertical videos.

2. Only available in Normal mode and not supported in D-Log M.

3. Omnidirectional obstacle sensing is only effective on surfaces with discernible textures and in lighting conditions exceeding 5 lux. Flight route memorization requires discernible textures and over 10 lux illumination. Refer to the product page on the official DJI website or the product's user manual for details.

4. ActiveTrack can work properly only when certain flight conditions are met. Refer to the product page on the official DJI website or the product's user manual for details.

5. The flight time was measured in laboratory conditions, while the maximum takeoff altitude was measured in a high-altitude environment. Refer to the Spec page on the official DJI website for details. Regulatory requirements vary by country or region. In the EU and UK, this Plus battery is only compliant for use with the aircraft from the DJI Lito X1 Fly More Combo Plus (DJI RC 2). Always check local laws and regulations before use.

6. Measured in an open outdoor environment without interference and with IC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to RTH reminders in the DJI Fly app during your flight.

7. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.

8. Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.

2, What is the certification class of DJI Lito X1 in Europe? Are there any accessory restrictions based on the certification class?

The certification class of the DJI Lito X1 in Europe varies depending on the specific combo.

Combos compliant with EASA C0 and UK0 class requirements include the DJI Lito X1, DJI Lito X1 Two-Battery Combo (DJI RC-N3), DJI Lito X1 Fly More Combo (DJI RC-N3), and DJI Lito X1 Fly More Combo (DJI RC 2). In the EU and UK, the aircraft in these combos do not support the use of the Intelligent Flight Battery Plus or the Propeller Guard in a legal manner.

The combo compliant with EASA C1 and UK1 class requirements is the DJI Lito X1 Fly More Combo Plus (DJI RC 2). In the EU and UK, the aircraft in this combo supports the use of the Intelligent Flight Battery Plus or the Propeller Guard, but not both simultaneously in a legal manner.

3, How do I activate DJI Lito X1?

With DJI RC-N3 Remote Controller:

Connect your mobile device (connected to the internet) with the remote controller, and then connect to DJI Lito X1 via the DJI Fly app. Follow the instructions in the app to activate DJI Lito X1.

With DJI RC 2:

When using DJI RC 2 for the first time, connect to the internet via Wi-Fi or a smartphone hotspot, and then follow the instructions in the DJI Fly app to activate the device. After activating DJI RC 2, connect it with DJI Lito X1 via the DJI Fly app, and then follow the instructions in the app to activate the aircraft.

4, Is DJI Lito X1 waterproof?

No. Avoid contact with water during use, as it may damage the device.

If it rains during the flight, return and land as soon as possible, and wait until the drone is fully dry inside and out before using it again.

5, What app do I need to install before using DJI Lito X1?

DJI Lito X1 can only be used with the DJI Fly app. You can download the latest version of DJI Fly from the DJI Lito X1 Downloads page on the official DJI website.

If you use DJI RC 2 as the remote controller, it comes with the pre-installed DJI Fly app.

6, What remote controllers are compatible with DJI Lito X1?

DJI RC-N3 Remote Controller, DJI RC 2, and DJI RC-N2.

7,How do I adjust the antennas of the remote controller?

Keep the antennas facing the aircraft during flight for optimal transmission.

8,How do I update the firmware of DJI Lito X1?

When the drone is connected to the remote controller and a new firmware version is available, the DJI Fly app will send you a firmware update prompt. You can follow the instructions to update the firmware for the drone, remote controller, battery, and other devices.

You can also update via the DJI Assistant 2 (Consumer Drones Series) software on a computer. The latest version of the software can be downloaded from the DJI Lito X1 Downloads page on the official DJI website.

9,What factors can lead to an update failure?

1. The battery level of the drone or remote controller is below 20%.

2. The drone or the remote controller is powered off during an update. If this happens, restart the drone and remote controller, and try again.

3. The network is disconnected during a firmware download.

4. Your smartphone interface is switched to other apps during a firmware download.

5. If the aircraft temperature is too high, the system will prompt that the update cannot proceed. Power off the aircraft, allow it to cool down, and move it to a shaded area before trying again.

The drone will restart multiple times during an update and automatically power off after completing the update.